Electric PTFE-Lined Ball Valve — Fluorine-lined electric ball valves use PTFE (polytetrafluoroethylene) or PFA (perfluoroalkoxy) linings to provide precise on/off isolation and flow control via electr
Fluorine-lined electric ball valves use PTFE (polytetrafluoroethylene) or PFA (perfluoroalkoxy) linings to provide precise on/off isolation and flow control via electric actuation. Engineered for strong acid, alkali, and high-temperature se
PTFE-lined electric ball valve
,explosion proof electric actuator
,PFA lined flow control valve
Fluorine-lined electric ball valves use PTFE (polytetrafluoroethylene) or PFA (perfluoroalkoxy) linings to deliver precise on/off isolation and flow control through electric actuation. Engineered for strong acid, alkali, and high-temperature service, these valves reliably handle corrosive process media and high-purity fluids in chemical, pharmaceutical, and semiconductor applications.
- Body styles: Two-piece (split-body) and three-piece designs offering low pressure drop, fast actuation, and a compact footprint.
- Inert liner: Smooth bore minimizes friction and fouling, while UV and weather resistance extend service life compared with conventional piping.
- Ball options: V-port and full-bore (O-port) configurations support both tight shutoff and modulating control.
- Actuation: Direct-mounted electric actuator with integral servo control — no external servo amplifier required. Operates on a 4–20 mA control signal and 220 VAC supply for simple wiring, compact installation, and reliable performance.
- Acids, alkalis, and salts
- Chlorine gas, steam, and raw water
- Mineral pulp and paper pulp
- Aqua regia, oxidizers, and reducers
- Corrosive chemical liquids
| Power Supply | AC110V, AC220V, AC380V, DC24V |
| Nominal Diameter | DN15–100 |
| Larger Diameter | Please contact us for larger diameters |
| Medium Temperature | -15℃ ~ +120℃ (non-freezing) |
| Working Pressure | PN1.0 ~ 1.6 MPa |
| Control Mode | Regulation or On-off Control |
| Connection Type | Flange Connection |
| Applicable Medium | Acids, alkalis, salts, chlorine gas, steam, raw water, ore pulp, paper pulp, aqua regia, oxidants, reductants, corrosive chemical liquids |
| Valve Body Material | WCB, ZG1CrMo, ZG, 1Cr18Ni9Ti, SS304, SS316 |
| Valve Bonnet Material | WCB, ZG1CrMo, ZG, 1Cr18Ni9Ti |
| Stuffing Box Material | WCB, 40Cr, ZG, 1Cr18Ni9Ti |
| Stuffing Gland Material | WCB, ZG1CrMo, ZG, 1Cr18Ni9Ti |
| Valve Seat Material | Perfluoro Copolymer FEP |
| Packing | Perfluoro Copolymer FEP |
| Design and Manufacturing Standards | GB12237-2021, API 6D |
| Flange Standards | JB 79-2015, GB/T 9124.1-2019, GB/T 9124.2-2019, ANSI B16.5, JIS B2212 |
| Face-to-Face Length | GB12221-2005 |
| Inspection Standard | API 598 |
Design Standard: HG/T 20592 | Flange Standard: HG/T 20592 | Unit: mm
| Nominal Diameter (DN) | L | D | D1 | D2 | b | f | Z-ΦD | H1 | H2 | W1 | W2 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 15 | 130 | 95 | 65 | 45 | 16 | 2.5 | 4-Φ14 | 216 | 47.5 | 196 | 145 |
| 20 | 140 | 105 | 75 | 55 | 18 | 2.5 | 4-Φ14 | 231 | 52.5 | 196 | 145 |
| 25 | 150 | 115 | 85 | 65 | 19 | 3 | 4-Φ14 | 236 | 57.5 | 196 | 145 |
| 32 | 165 | 140 | 100 | 78 | 19 | 3 | 4-Φ18 | 256 | 70 | 196 | 145 |
| 40 | 180 | 150 | 110 | 85 | 19 | 3.5 | 4-Φ18 | 261 | 75 | 196 | 145 |
| 50 | 200 | 165 | 125 | 100 | 19 | 3.5 | 4-Φ18 | 271 | 82.5 | 196 | 145 |
| 65 | 220 | 185 | 145 | 120 | 19 | 3.5 | 4-Φ18 | 303 | 92.5 | 255 | 182 |
| 80 | 260 | 200 | 160 | 135 | 20 | 3.5 | 8-Φ18 | 358 | 100 | 255 | 182 |
| 100 | 280 | 220 | 180 | 155 | 21 | 4 | 8-Φ18 | 383 | 110 | 255 | 182 |
Design Standard: HG/T 20592 | Flange Standard: HG/T 20592 | Unit: mm
Switching action mode: open/close operations are achieved via AC switching signals, and a set of active position signals indicating fully open / fully closed status is output.
Switching action mode: outputs passive contact signals. Structure: equipped with two intermediate position switches.
Switching action mode: outputs 0–1000 Ω feedback signal. Structure: equipped with 500 Ω or 1 kΩ potentiometer.
Switching action mode: outputs 4–20 mA valve position feedback signal. Structure: equipped with 1 kΩ potentiometer and R/I converter.
Regulating action mode: accepts 4–20 mA control signal input and outputs 4–20 mA valve position feedback signal. Structure: integrated with 1 kΩ potentiometer and control module (servo amplifier).
DC switching signals are output from the circuit via an external DC power supply to control the opening/closing program, and a set of passive contact signals corresponding to fully open / fully closed positions is provided.
Switching action mode: controls valve opening angle via switching circuit, corresponding to potentiometer resistance value, while enabling intermediate position control function. Structure: integrated with potentiometer and intermediate position switch.
Three-phase AC switching signals are output through an external three-phase power phase-reversing circuit to control opening/closing operations, accompanied by a set of passive contact signals for fully open / fully closed position indication.
Scan to add on WeChat